Cookware handle tensile tester

Test procedure:

1. Fix the treated sample and place it on the horizontal test table;

2.  the traction wire and pot handle is fixed, through the handle to adjust the weight and impact hammer height to suspended;

3.  at the same time adjust the test bench Angle and weight, impact hammer height to make the pot handle and traction line parallel;

4. The impact hammer is placed at a high position to form a vertical impact, the distance is 150MM;

5. After reaching the number of impact, put the position of the weight and impact hammer on the low, unload the sample to check the damage degree;

Product parameter：