High temperature oven (can be customized)

High temperature oven (can be customized)

The air circulation system adopts dual-motor horizontal circulation air supply mode, which ensures uniform and efficient air circulation. The air source is driven by a circulating air supply motor (using a frequency converter) to drive the wind wheel (Φ230) through the electric heater, and the hot air is sent out, and then to the inner room of the oven through the air duct, and then the used air is sucked into the air duct to become the air source for recirculation , heated for use. Ensure indoor temperature uniformity. When the temperature value swings due to the door opening and closing action, the air supply circulation system can quickly restore the operating temperature value.

описание

Features:

1. Strong durability: Since the electric heater is sealed in the box, the contact surface with the outside air is small, so it is not easily oxidized and corroded.

2. Electrical control is safe, accurate and reliable: reasonable structure, large effective working area, full functions, simple operation, convenient maintenance and adjustment, low noise, high reliability, low cost, low energy consumption and high production efficiency.

3. Internal heat circulation: Baking objects are heated evenly.


Temperature Control System:

1. The temperature control instrument is a PID digital display instrument with single-point temperature control, automatic calculation, PV/SV simultaneous display, and button setting;

2. Timer setting: 1 second - 9999 hours (optional setting of hours, minutes and seconds), when the temperature reaches the time, the heating current is cut off (alarm device)

3. Temperature sensing line (K) type;

4. Signal output is 3-32V;

5. The heating control is: solid state relay SSR has no contacts;

6. The heating element is: high temperature resistant heating tube;

7. Temperature range: RT+20~200℃;

8. Heating rate: about 15 minutes at 100℃

9. Control accuracy: ±1.0℃;

10. Display accuracy: 0.1℃;

11. Temperature deviation distribution uniformity: ±2.5℃. (No-load test)


parameter

modelsizetemperature
HJ-64D400*W400*H400mmType C: RT+10~350 degrees, D type: RT+10~450 degrees
HJ-150D500*W500*H600mmType A: RT+10~200 degrees, Type B: RT+10~250 degrees
Type C: RT+10~350 degrees, Type D: RT+10~450 degrees
HJ-240D500*W600*H800mm
HJ-270D500*W600*H900mm
HJ-480D600*W800*H1000mm
HJ-672D700W800*H1200mm







похожий продукт

Поболтай с нами