VOC release chamber

VOC release chamber

The formaldehyde emission test chamber is suitable for the determination of formaldehyde emission of various wood-based panels, composite wooden floors and other interior decoration materials, the constant temperature and humidity balance treatment of wood or wood-based panels, and the detection of volatile harmful gases in other building materials. The limited release of formaldehyde from interior decoration and decoration materials is a hot issue of environmental protection that all countries in the world are generally concerned about. Important indicators of quality are related to the impact of products on environmental pollution and human health. The test method of formaldehyde emission climate chamber is a standard method for the detection of formaldehyde emission of interior decoration and decoration materials widely used abroad.

Description

Features of VOC release chamber

♦ The wind speed adjustment inverter is installed at the rear of the box, with a recessed design, which is easy to protect;

♦ The diameter of the air outlet of the air plate is reduced, and the diameter is about 2-3mm, so as to avoid the formation of flowing air and raise the dust in the laboratory;

♦ The heat dissipation holes at the bottom of the front are changed into a louver-like shape, the internal compressor cannot be seen from the outside, and dust can be prevented from falling into;

♦ There is an isolation layer between electrical loads to avoid mutual interference;

♦ The box body and the box door are filled with filling materials to ensure the slightest opening and closing sound of the box door.

♦ The door handle has excellent mechanical properties;

♦ There are 3 sampling holes, and the connection between the inner and outer diameters is flanged to ensure sealing;

♦ The caster support triangular plate is thickened by 5mm to ensure the long-term durability of the box;

♦ The air outlet holes of the internal circulation fan blades are not convex, and the air ring is inlaid inside to ensure the overall appearance of the box;

♦ The box door adopts double sealing strips to ensure that the inner compartment is sealed and there is no air leakage;

♦ The position of the internal fan is adjusted accurately to ensure the accuracy of the test;

♦ The appearance color of the equipment adopts computer white, which is beautiful and has a sense of the times.


Parameters of VOC release chamber


Studio sizeInner box size 1±0.02 m3
Carton sizeOne side is less than 1.45m, and the height of one side is less than 1.9m
Adjustment range Temperature range+15℃~+50℃
Humidity range30%~80%RH
Meter Resolution Temperature0.1℃
Humidity0.1%RH
fluctuating temperature≤0.5℃
uniformity temperature≤1℃
Temperature and humidity deviation temperature(-0.5℃,0.5℃)
Humidity(-2%RH,3%RH)
The wind speed at the center point in the studio fan box0.1~1m/s
Air replacement rate range0.2~2 times/hour
Flow adjustment range

It needs to be greater than 0.2~2m³/h, that is, 0.2 is not the minimum value, 

2 is not the flow value, and the accuracy error of the limit value is relatively large

Background index formaldehyde

background concentration

≤0.006mg/m3



Related Product

Chat with us