Desktop xenon lamp aging test chamber

Features of 

The xenon arc test chamber uses a xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments, which can provide corresponding environmental simulation and accelerated tests for scientific research, product development and quality control. The xenon arc test chamber can be used to select new materials, improve existing materials, or evaluate changes in durability after material composition changes. It can well simulate changes in materials exposed to sunlight under different environmental conditions.

Test standards for 

This product is designed and manufactured strictly according to the technical parameters of GB/T16422.2-99. At the same time in line with GB/T 2423.24-1995, ASTMG155, ISO10SB02/B04, SAEJ2527, SAEJ2421 and other standards.

Parameters of 

Lifting sample weight	Within 0-600KG (parallelepiped transport package)
Liquid crystal display	The screen shows the large clamping force value, holding time, displacement, number
Force accuracy	National standard level 1.6
Sensor accuracy	1/20000, measuring accuracy 0.5%;
The splint is shifted upward	0-1000mm(according to customer requirements) displacement precision to the standard
Splint left and right travel displacement	0-1200mm (can be determined according to customer requirements)
Size of clamping plate	1220*1220mm(according to customer requirements)
Clamping experimental speed	Up and down 600mm/min; About 1-500mm/min(adjustable)
Unit of force	Kgf/N/Lbf
Transmission mode	servomotor
Protective device	Leakage protection, travel limit device, overload protection, over voltage protection, power protection, emergency stop device
Splint force sensor	Four (More efficient and sensitive induction gripper transmission power)
Platform splint	The thickness of the splint shall not be less than 20mm to ensure that the clamping plate is in the clamping state (< 2000KG) no deformation, between the two splints are parallel, and the bottom plate is vertical, and the use of high quality non-slip rubber pad, to ensure that the packaging sample in the test process is not easy to slip and damage.
Machine size	2650*1900*2120mm
voltage	AC220V/50HZ