Features of Electronic door lock life testing machine
Electronic smart door lock simulation door life testing machine is one of the testing machines used to test or verify whether electronic smart door lock products are suitable for use in a specific environment simulation, the time to effectively complete their functions, the number of effective uses, and the detection of A testing machine that can determine its aging fatigue value (that is, to detect the limit "shelf life" of electronic smart door lock products), and realize the testing and R&D center to improve the verification service life test of the new product design stage of electronic smart door locks.
Parameters of Electronic door lock life testing machine
| Overall dimensions | Length (1100mm - 1400mm), Width (1100mm - 1400mm), Height (2100mm - 2500mm) |
| Simulate door frame size | Length (2000mm - 2400mm), Width (1000mm - 1300mm), Note: 2100mm * 1100mm (European standard) |
| Analog door weight | 100KG |
| Working environment temperature and humidity | Temperature between -10℃～40℃, humidity≤85%RH |
| Equipment working voltage | 220VAC |
| Rated power consumption of the whole equipment | ≤800W |
| Air supply input standard air pressure | 0.25-0.6MPa |
| test station | single station |
| Simulate door opening direction | open right |
| Test steps support programming steps | ≥30 steps |
| Support password keyboard digits | ≤12 bits |
| Support input password digits | ≥6 bits, ≤32 bits |
| Test working frequency (fingerprint, password, credit card, mechanical key) | 5 - 15 times/min |
| Support life test value | 500,000 times |
| Handle open door torque, torque (KN) | 0-44NM |
| Key opening torque, torque (KN) | 0-10NM |
| Lateral force of the tongue (close the door) | Each station can carry 10N, 25N, 50N and 120N loads respectively (European standard) |
